VAG KKL 409.1 VAG-COM 409.1 KKL Software Download VAG KKL 409.1 is China obd 409.1 KKL USB cable. Have the functions of a factory VAG-1551 or VAG-1552 scan tool and more. Need free download link for Vagcom 409.1 KKL USB Software? USB KKL VAG-COM 409.1 KKL VAG 409.1 USB Here is the free download link for you VAG-COM 409.1 KKL Software Vagcom 409.1 KKL USB Driver　VAG KKL 409.1 is fully compatible with almost all for VW/ for AUDI/ for SEAT/ for SKODA vehicles including those with KKL, but without CAN-BUS. VAG-COM 409.1 KKL interface (adapter) is used as an interface and a USB cable to connect a for VW/ for AUDI vehicle to a PC with USB port for on-board diagnostics (OBD). 3ds powersaves license key suspended. Snap on solus ultra update.

What works Everything except a baud rate bug (see below) What does not Serial port baud rate would reset to 0 when running a new 'Test' or 'Select' after a 'Test'. This makes port unusable Workarounds What was not tested Different adapters (incl. Genuine Ross-Tech cables and pure serial), only a noname KKL-USB Hardware tested Graphics: • GPU: • Driver: Additional Comments It seems that almost any version of VAG-COM/VCDS would work with the configuration described. I tried VAG-COM 311.2, VAG-COM 409.1 and VCDS-Lite 1.1 - all worked well. Tested using a KKL-USB cable with Serial-to-USB FTDI_FT232R inside. Full device name as seen by OS: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A400h11D-if00-port0 Device driver: ftdi_sio Do not forget to add a symlink $WINEPREFIX/dosdevices/comN to this device and change permissions (see Works flawlessly except one issue: if port baud rate is set to 0, the app fails to communicate with 'Interface not found' error. When launched from console, a message 'err:comm:get_baud_rate unknown speed 1000' is generated by Wine The fix is to use stty and set baud rate to something acceptable, i.e.

9600: stty -F $WINEPREFIX/dosdevices/com1 speed 9600 This is to be repeated after each 'Options->Test' and after first 'Select'. To automate the process, I have created a launcher: #!/bin/bash #VAG-COM launcher for Linux #Does what: # - Launches VAG-COM via Wine # - Specifies COM port baud rate, if set to zero (fixes an 'Interface not found' bug') # - If necessary, applies fix to VAG-COM 409.1 (fake registered version) # - Repeats on specified interval # Copyright (c) Alexey Antipov 2011. Public domain.

Installing VAG-COM 409.1 on Windows 7 The shareware version of Ross-Tech's VAG-COM package - version 409.1 - was written in 2004, and so was never designed to work with Windows 7. Ross-Tech have since released VCDS-Lite, which is compatible with Windows Vista / 7, and so is a better option. [New Version] Findway VAG-COM KKL 409.1 USB Interface diagnostic cable. I tried with Ross-Tech lite version, cracked version of VCDS, VW workshop.